Bridge Block

The bridge block improves control by providing a large contact surface for your front mid-foot without locking you in.

All footholds can be used in conjunction with one another to achieve the configuration that works best for your ride style.

Adjustability

Using at least 2 M5 bolts, the bridge block can be secured to the HITBOX bracket at multiple heights and angles to better align with the bridge of your foot.

Spacers can be used to further offset the block from the bracket. Spacers of differing heights can be used to change the angle of the block relative to the bracket.

Design Geometry

When pressing your foot flush against the block, it will be 25° off of parallel (toe further out than heel).

The bottom half of the block is parallel with the HITBOX bracket, which itself is angled 15° inward from perpendicular to the board's rail. The upper half of the block is angled slightly further inward to increase traction as your foot lifts.

The bridge block is asymmetrical so be sure to select the right variant for your stance.